Conceived whilst on the banks of Lake Kournas, these bold, geometric signet rings echo the sharp, angular lines of the surrounding Cretan mountains. Made to order in 9ct or 18ct yellow, rose or white gold. Traditional deep seal engraving is not possible for this style. To enquire about surface engraving, please contact the Sales team here
Of the three carats of gold we offer, 9ct (375 parts of gold per thousand) has the lowest gold content. As a result, it is the toughest of the three - the higher the gold content, the softer the metal. We would recommend 9ct gold if you're very active and your hands take a lot of wear and tear. White gold is simply yellow gold mixed with different alloys to give it its colour. Usually created by adding palladium and silver, the colour is not white like platinum but more of a light grey steel colour. It is usually a little more expensive than yellow or rose gold, as the alloys added to create the white colour are precious metals.
Dimensions: 6x17mm
Face Thickness: 2mm at the thickest point
Weight: 7g approx.
Deep seal engraving
Traditional deep seal engraving is the most popular method of engraving signet rings. We create your design by carving deeply into the metal, hand engraving the design in reverse.
Once the seal engraving is completed, we use the engraved signet ring to produce a 3d wax impression - the seal. Your ring will arrive presented in a beautiful gift box, with an encapsulated impression of your design and a wax taper to make your own seals. If you would prefer for us to engrave your design as it is seen on paper, i.e. not in reverse, please let us know by using the comment box found in your shopping bag. read less
read more
Surface cut engraving
As with seal engraving, surface engraving is produced by hand, using handheld gravers. In fact, it's the same technique used by traditional bank note engravers.
Unlike seal engraving, we don't carve deep into the metal - instead, we create the design by cutting hundreds of lines of varying widths and depths until the design comes to life. This method is ideal for cufflinks and it also looks effective on signet rings, but does not have the same longevity as seal engraving. read less
read more
Engraving message inside the band
You can have a message or motto of up to approx 25 characters hand engraved inside the band for just £50.
Of course, this depends on the finger size, so talk to us about whether your engraving will fit. You can choose from two styles - either roman capitals or upper and lower case script. read less
read more